Top Border
netgear router setup

Complete Your
Netgear Router Setup

If your Netgear router is already logged in click on Setup router
Want to access netgear router login page? click on login

Enter Router Login
netgear router setup banner
border line

Essentials before Netgear Router Setup

  • 1

    Connect Your Router, Modem, and Computer

  • 2

    Verify your router connections

  • 3

    Check the Internet Speed

  • 4

    Use browser with latest version

  • 5

    Ensure no dust or
    related fragments near the router

  • 6

    To start with setup click below

For Extender login click mywifiext.net login

Things to do before netgear router setup
fix border

Select Your Way for Netgear Router Setup

Choose your device to get started with Netgear wireless Router Setup

netgear rourt setup laptop and PC

Learn to setup Netgear router with different Methods on PC

Netgear router setup mobile

Know how to install Netgear Router using wireless device

border

Get Started With Netgear Router Setup

Watch out the steps for error-free Netgear wireless router setup using routerlogin.net

setup router error free, diffrent platforms , desktop and mobile
desktop-border

Using Your Desktop

Finding it difficult to setup Netgear router using Cable or DSL Internet? Follow these crucial steps to troubleshoot the problem!

netgear router setup using your desktop
smart-wizard-border

Setup Netgear Router with Smart Wizard Interface

Available for Older Netgear Router Models

Routerlogin.net Setup - Smart Wizard Setup

  • 1

    Use Ethernet cables to make connection among modem, Netgear router, and computer.

  • 2

    Turn Off the devices & then, again power ON all three of them.

  • 3

    Launch a browser and type Netgear router setup IP: ‘192.168.0.1’ in the address bar to open the login page.

  • 4

    Type the Netgear wireless router password to enter Setup Wizard & tap on ‘Yes' to find the Wi-Fi connection.

  • 5

    Finally, Click on ‘Next' option unless Internet connection is found.

NOTE: Save Netgear router setup settings before use.

If you are willing to setup a wifi extender go to " WiFi Extender Setup "

smart wizard method to setup netgear router
dsl methods for netgear router setup

Smart Wizard Interface - DSL Method

  • 1

    Attach telephone to DSL micro filter and Netgear router to telephone jack. Use Ethernet cables to connect your PC with router.

  • 2

    Power ON the Netgear router and wait for its full boot up. Then, launch any web browser you want.

  • 3

    Type http://192.168.1.1 in the address bar of browser window to open Netgear router login page

  • 4

    Enter Netgear router’s username & password to reach ‘Setup Wizard' for establishing Internet connection.

  • 5

    Configure Netgear router by providing essential credentials, such as username, password, IP address, IP subnet mask, primary DNS, and many more- based on your ISP.

NOTE: For PPPoA or PPPoE connection, you need to provide the login & password information.

line color border

Setup Netgear Router with Genie Interface

Available for New Netgear Router Models

Router Setup - Genie Web App Interface

  • 1

    Power off your modem and Netgear router Then, use Ethernet cables to connect modem, Netgear router, and computer.

  • 2

    Turn On all the devices and wait unless they become stable.

  • 3

    Open routerlogin.net address in a browser and type default Netgear router login credentials to enter the Genie setup wizard.

  • 4

    Follow on-screen instructions to detect and connect to the internet connection.

  • 5

    Finally, tap on ‘Take me to the Internet' option to verify your connection is working.

Setup up router using genie interface
Genie DSL method to setup router

Router setup using Genie Interface - DSL Method

  • 1

    Use DSL micro filter to connect telephone, Netgear router, and telephone jack. For connection between computer and router- use Ethernet cables.

  • 2

    Switch on all the devices and launch Internet Explorer or Chrome. Type http://192.168.0.1 or http://www.routerlogin.net to open Netgear Genie Setup Wizard

  • 3

    Follow on-screen instructions to detect the Internet connection. Next, type the Netgear router login credentials (provided by your ISP) to access the network.

  • 4

    You can verify the status of Internet connection by clicking on ‘Take me to Internet' option.

  • 5

    Netgear router is all configured to use.

If you own and wish to setup netgear extender with router may need to go through below sections.

using-mobile-border

Using Your Mobile

Simple instructions to help you get started and troubleshoot Netgear router setup issues via mobile phone

Setup Netgear Router Using Genie App

To register Netgear router on routerlogin.net, firstly ensure you are locally connected.

  • 1

    Connect router's Wi-Fi network to mobile device.

  • 2

    Download Netgear Genie App and launch it.

  • 3

    Type Netgear router login credentials to open its dashboard and find register button.

  • 4

    Click on ‘Register product' button to begin Netgear router’s registration.

  • 5

    Tap ‘Yes’ in prompted window to complete the router registration.

Setup router using genie app mobile
Explore Netgear Router Setup Guides & Articles
line border

Explore Netgear Router
Setup Guides & Articles

Self Troubleshooting Guide

Fix your Netgear Router setup, login, password, Wi-Fi & other concerning problems using tips and instructions.

Netgear Router Reset

Following instructions apply to almost all Netgear routers, except DGN2000 or DG834gv5 router.

 

However, before you start with the Netgear router factory reset; make sure the router is ON.

  • 1

    Locate the 'Restore Factory Settings' or 'Reset' button on the Netgear router device. These buttons are quite small to a naked eye.

  • 2

    Take a small paper clip or plastic pin that can easily insert into a miniature hole like recess in router.

  • 3

    Using this small tool, press and hold the reset button of Netgear router for around 7 seconds. The time router starts- its power light will begin to blink.

  • 4

    Wait patiently for the reboot process to complete. Once it finishes, the power light on Netgear router will start glowing green or white in color.

  • 5

    This is how; Netgear router reset will restore all the default factory settings.

  • 6

    Now, it's time to again setup and configure your Netgear router using routerlogin.net.

learn how to reset netgear router using paper pin
reset Netgear router DGN2000 or DG834gv5 though wps and wirless button

For Netgear router DGN2000 or DG834gv5, follow the instructions stated ahead.

  • 1

    For these exceptional Netgear routers, locate certain buttons at the side of the router- with label "Wireless" and "WPS." These buttons are easily visible to the naked eye.

  • 2

    Just press and hold the ‘Wireless' and ‘WPS' buttons for approximately 6 seconds, simultaneously. During this action, the power LED light will start blinking RED.

  • 3

    Release the power button after certain time to let the Netgear router completes the reboot process. Once the reboot finishes, the power LED will start blinking Green in color.

  • 4

    This way, Netgear router reset completes and you can now use your again setup Netgear router.

NOTE: It is highly suggested- NOT to access Netgear router or sign in routerlogin.net web address unless the reboot process complete.

Reset Netgear Router using routerlogin.net

  • 1

    Connect your router, modem, and computer using Ethernet cables, which are also known as Internet cable. Next, type Netgear router setup IP in any browser window. You can also use http://routerlogin.net web address to open the Netgear router login page

  • 2

    Type Netgear wireless router password to enter router’s setup dashboard and select ‘Maintenance' tab in left pane.

  • 3

    Then, go to ‘Backup' settings and press ‘Erase' button to delete all the changed settings that you have made in system.

  • 4

    This way, you will reset Netgear Router to default settings and after the process completes, don't forget to reboot your devices and router to save the applied changes.

  • 5

    Again, login routerlogin.net and go to ‘Diagnostics' option and select ‘Reboot' from the list. Wait patiently for your Netgear router reboot process to complete. And, if possible- don't forget to reboot your Internet modem as well.

reset-netgear-router-using-routerlogin-net
two color border

Diagnose Netgear Router Setup. Find its Solution

Solution to Netgear router setup issues- commonly experienced by users

Most Common routerlogin.net Problems-Solved

Netgear router not connecting to internet

  • 1

    If Netgear router not connecting to internet, then first power cycle Netgear router! In case, you suspect the connected wires- check out the Netgear router setup section above (explained in the beginning).

  • 2

    Once done, reboot all the three devices, and you may also try to access the Internet. In case, you have already tried this step several time- it implies the problem could be with MAC address. So, you can try the Mac cloning method to fix the issue.

  • 3

    However, many a times- the problem has been related to IP pooling systems. So, in this case of routerlogin.net not working, check the modem and do the IP pooling. If you aren't aware of this step, contact the Router login experts for assistance.

  • 4

    Still the problem of Netgear router not working persists? Then, the problem is right away related with modem. And, in this situation-you need to perform Netgear router reset through routerlogin.net address.

  • 5

    Lastly, login to the router settings > Choose wireless settings option > Change the SSID (Wireless name). Then, under wireless security settings, change the security key (Wi-Fi password). Finally, save these settings and try to connect with the new wireless network.

Routerlogin.net not working

  • 1

    To start with the troubleshoot-make sure you are using the correct web address, login username and password. In case, you previously changed the username or password for your Netgear router, make sure you are using the updated one.

  • 2

    If you receive an error when trying setup Netgear router, delete the cache of your internet browser. Other than this, you can try accessing the Netgear router wireless setup from different browsers like Internet Explorer, Mozilla Firefox, or Apple Safari.

  • 3

    If your Netgear router is running multiple networks at one time, disconnect all from Internet and only connect to your router. Here, multiple networks refer to other wired, wireless, VPN, or corporate connections.

  • 4

    Sometimes, antivirus, firewalls, ad blocking software and pop-up blockers also trouble while setting up Netgear router. So, temporarily disable them all. Other than this, you can also power cycle all the three connected devices: modem, router, and computer.

  • 5

    Lastly, if none of these steps seem to work, go for Netgear router reset to receive the default settings again. Additionally, check and make sure your Netgear router firmware is updated. In case you need help for Netgear router firmware update, Call Support team.

Can't login in to netgear router "Read Routerlogin.com troubleshooting guides"

Netgear Router Internet Light Orange

  • 1

    To troubleshoot Netgear router blinking orange problem, firstly make sure you get the stable and consistent internet from your ISP. Next, check your connection type and accordingly, go for the Netgear router setup. For eg. To setup PPoE connection, setup router manually.

  • 2

    If the wired connection between router and modem is inaccurate, you'll see ‘Netgear router blinking orange internet light.' So, make sure that the connection between these devices is correct. And, don't forget to reboot all the devices- before Netgear router setup.

  • 3

    3Sometimes, modem doesn't recognize the Netgear router. Therefore, to troubleshoot these issues of routers blinking orange internet light- go for Mac cloning. For this, open router setup page-> Click Advance option-> Tap on Mac cloning-> Click Clone and Apply.

  • 4

    Using older Netgear router firmware could be another reason of Netgear router blinking orange issue. Thus, go for Netgear router factory restore method. Still bothered by the error?- then, reset the router and reboot to check- if the problem is resolved or not!

  • 5

    Lastly, if none of these steps seem to work for Netgear router setup, check and make sure your Netgear router firmware is updated. Read firmware update Troubleshooting Guide.

Hardware Issue:

  • 1

    With the above instructions, your Netgear router will start working. However, if Netgear router is blinking orange internet light then, most probably, your router has a hardware failure. So, get your router replaced- by contacting the manufacturer or retailer.

Get Wi-Fi Router Login Support Right Now

1-866-317-4606

With no more hours of addressing to Automated Systems, talk to experts directly!

Request Callback