Netgear Error 404- One Stop Solution for Everyone
How should I deal with Netgear error 404- file or directory not found issue, if it continues to display on my screen?
What should I do if a 404 error message displays when I try to login routerlogin.net? With all such queries in mind, read this post and find your answer!!
The Netgear error window may pop-up anytime. However, this issue is highly reported in scenarios like:
- During Netgear router setup
- New wifi extender setup
- While connecting Netgear router to Extender
- Trying to access Internet post Router’s firmware upgrade
- When trying to Connect Wi-Fi devices to router
- If trying to login routerlogin.net interface
If you find your situation similar to the ones stated herein- then without thinking twice right away start attending the troubleshooting steps defined below.
Note: Otherwise also, these steps are quite helpful because there are thousands of other situations that might display error Netgear 404. But, we cannot enlist all of them here!
Reasons behind Netgear Error 404
Want to know what went wrong or what change made by you in device or network settings has led to this web server 404 not found error?
Here’s the list of causes that may help you identify your mistake.
Browser Compatibility Issue:
Some of the browsers may have problem communicating with the server while others might find it difficult to locate certain files. And, all this majorly happen because of some browser not compatible with certain websites or pages.
Wrong or Incomplete URL:
This is one of the silliest errors but can happen with lot many Netgear users. In fact, more than 67% of users have reported so far that they were getting a 404 Netgear router error just because of misspelled URL.
Crashed or corrupted Web browser:
Virus attack, some add-ons, extensions, or partial browser installation- causes web browser files to get corrupt. And, if not treated on time, this may also crash the browser that ends up displaying 404 router errors.
Vulnerable Internet connection:
If Netgear router keep losing Internet connection or the Internet LED on router is lit orange in both the scenarios you keep getting 404 - file or directory not found message on screen.
Inaccurate router/ extender settings, incompatible firmware download and upgrade, or partial device setup via Netgear router Genie interface or mywifiext.net address- also shows Weird 404 error during set up router or extender.
Compatibility Issue with the Device:
As, said earlier- if the Router or Extender firmware that you download to install on device is not compatible, you may be dup seeing Netgear error 404.
These are some of the popular reasons for Netgear router not found error 404. In case, you can’t find your reason for 404 server not found- don’t worry!
Because, more important are the solutions enlisted below, which will surely help you get rid of the Netgear error message with code 404.
Can't forward ports on Netgear router- 404 error?
Contact Router Login Experts @866-317-4606
What is Error 404 when trying to connect router devices?
By now, you must have got a clue that 404 error when connecting to wifi, can have varied forms but at the end has same meaning. For instance, when you try to connect open a webpage that might not exist, it is called a 404 error. Likewise, after Netgear router complete setup, when you finally click on Continue button to detect the wireless device- you may see a dialog box with error code 404.
In short, the Netgear error 404 has same meaning in all situations, only the name of this error may differ. For this issue, you might see things like:
- HTTP 404
- 404 Page Not Found
- 404 File or Directory Not Found
- Error 404 Not Found
- 404 error wifi sign in
- 404 Resource not found
- Error 404 when using router's UI
- Router Model R6400 404 Error
So, now- let’s take a look at some troubleshooting steps that you can try to fix a 404 error at your end.
How do I fix Netgear error 404? – Find your Fixes
Try the steps listed below unless you stop getting a 404 not found error.
- Hard Refresh your webpage by pressing CTRL+R keys altogether on keyboard. As, sometimes a simple refresh also loads the routerlogin.net webpage.
- Check and type correct and exact DNS servers. If you screw up with the URL name- the error 404 Netgear not found will keep prompting on your screen.
- Another way is moving to one directory level at a time. This will help you find what exactly- you’re looking for or know which page or site is no longer available.
- In case, you can’t locate Netgear router login or mywifiext.net sign in page, search your interface using popular search engine. As, you might be typing the wrong URL earlier.
- In case, none of the above solutions seems of any help then, delete browser’s cache, cookies, and history as, sometimes the 404 Netgear not found issue might be just yours.
- Try login Netgear nighthawk interface using some other device. If it’s accessible then, change the DNS servers used by your computer.
- Contact your ISP and confirm that there’s no network or Internet issue at their end. In case, you find that server outage is the reason, then wait for the issue to resolve at your ISP’s end.
DO none of these solutions help you resolve your www.routerlogin.net 404 error?
Don’t frown upon your current situation. Rather, tie your laces as; it’s time to apply certain more tough solutions on your rigid Netgear setup 404 error.
Can’t Get Rid of Netgear Error 404: Let’s Troubleshoot
Before you start with these fixes, we would only suggest you to carefully watch and implement each step (as given in sequence).
- First and foremost, try using another browser window and confirm that incompatible browser is not the reason for Netgear router not working.
- Likewise, try accessing Netgear router or extender login using private and Incognito window.
- Next, scan your device to check and see- if there is any malware or Virus present in your system. Because, these infected files in device may control and stop any function or website to open.
- If all is good till now, then open Network and Sharing center.
- Then, choose adapter settings from left pane and check for any enabled VPN or proxy server. If found, right-click on that network and select Disable option.
- Disable all third-party security software like anti-virus installed on device. Perform this action based on your installed anti-virus.
This is required because sometimes, anti-virus programs don’t allow certain URL’s to filter through their shield window.
- In case your Netgear router login 404 error persists, then open Network and sharing center-> tap on Adapter settings-> right-click on activated network-> choose Properties-> and lastly, uncheck Internet Protocol Version 6 (TCP/IP) and click OK.
- Change security type on router, if you continue to see message-“Can’t access internet through wireless connection HTTP 404 error.”
- In case, your Extender can’t connect to router displaying a 404 error then, you may try removing Netgear router’s password temporarily.
With these above solutions, if you can’t find the answer to your query-“How to Fix error 404 d Error during New router setup,” then let’s get into more technical solutions.
How to Fix 404 Not Found Error during New Extender Setup?
Ask Router Login Experts @866-317-4606 for Solution
Solution 1: Factory Reset Router
This solution will restore all the default router’s settings. In case, the issue prevails due to Netgear extender- the applied solution will be same, only the steps may differ.
For detailed instructions, see steps to reset Netgear router.
Instructions to Netgear Extender Factory reset.
- After the device is reset, you need to setup your Netgear router again.
- Then, open command prompt and ping the line connection to confirm the Internet connection.
In case, you didn’t get reply via ping command, learn to fix Netgear router not connected to Internet Issue.
For Netgear range extender, if you encounter the same problem, see: Guide: Netgear Extender not connected to internet.
Solution 2: Setup your Router in Bridge Mode
Sometimes, Wireless-N Router HTTP 404 NOT FOUND error also displays when multiple devices are connected on one network. As a result, you cannot get access to websites like routerlogin.net.
Thus, to get away from this Netgear error 404, setup your router in bridge mode. To do so:
- Firstly, disconnect all the devices.
- Login Netgear router via routerlogin.net address. You may even access your router’s default gateway address to login directly.
- Login your router page to display BASIC Home screen page.
- Then, under ‘Advanced’ tab, tap on ‘Advanced’ setup option and choose Wireless Bridge.
- Next, select ‘Enable Bridge Mode’ checkbox and click on Setup Bridge Mode Wireless Settings button.
- Afterward, select the wireless network frequency (2.4 GHz or 5 GHz) and set the SSID, network security, and channel value for the router.
- Do not forget to choose 11ac mode for 5 GHz.
- Under Security Options section, select WiFi security mode.
- Finally, click on Apply button to save the Advanced Wireless Settings.
Restart your router and now, you may again connect multiple devices to your router without getting a 404 Error at the End of router setup.
Frequently Asked Questions
Question: Troubled by error network 404 after I upgrade firmware- What shall I do now?
Solution: Reset Netgear router to default settings so, you can fix ‘No web interface 404 after firmware upgrade.’
Later, restore your system to the stage, where it was before firmware upgrade.
Note: You’ll lose all the changes applied in your system. So, we recommend you create a backup of all other required changes beforehand.
Now, to restore system to previous settings:
- Start your computer or laptop and press F8 key continuously.
- Then, under Advanced Boot Options, select Repair Your Computer and hit ENTER.
- You may even need to share your admin account details to continue with the restore action.
- Finally, at the System Recovery Options, select System Restore and click OK to perform the action.
Question: How to fix Netgear wifi extender error 404?
Solution: Use Static IP address
For the solution to this Netgear error 404, locate your Netgear extender’s new IP address using browser window that your cable router gives to it.
For instance, if your cable router address is: 10.0.0.1. Then, your extender IP address would be somewhat like: 10.0.0.2. Type this address into your browser and you’ll no more see “Unable to connect to internet; HTTP ERROR 404".
Still troubled by ‘Wireless-N Router HTTP 404 NOT FOUND’ error?
Contact Router Login Experts @866-317-4606 for Fix